OMU (BRUMLEY 6-19) #1916
API 3513920713 · Texas County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.
Completion 3
STRAIGHT HOLEACOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MORROW SAND | DRY | 4,396–4,562 | Acid |
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 15.5 | K-55 | 4,774 | 200 |
| SURFACE | 8 5/8 | 23 | — | 1,507 | 750 |
Completion 4
DIRECTIONAL HOLEACOILInterval
| Formation | Produced | Perforated (ft) |
|---|---|---|
| MORROW SAND | OIL | 4,484–4,536 |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2014-06-07 | 5 | 0 | 250 | — | 0 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | — | J-55 | 4,844 | 600 |
| SURFACE | 8 5/8 | 23 | — | 1,507 | 750 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 1998-07-02
WRADPTarget formation
| Formation | Expected top (ft) |
|---|---|
| MORROW | 4,390 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2014-03-12
WRADPDirectional holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| MORROW SD | 4,445 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.796420, -102.016670
Every well in Texas County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.