MCREE #1-5H
API 3514921490 · Washita County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| DES MOINES UP | GAS | 12,904–17,010 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-07-16 | 50 | 1,050 | 0 | 51.5 | 5,748 | 20/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 7 | 29 | HCP-1 | 11,900 | 675 |
| LINER | 4 1/2 | 13.5 | P110 | 17,322 | 470 |
| INTERMEDIATE | 9.625 | 40 | J55 | 5,438 | 725 |
| SURFACE | 13 3/8 | 48 | J55 | 574 | 605 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-02-19
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| DES MOINES UP | 11,551 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.464780, -99.335700
Every well in Washita County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.