CARL WALTON 10-11-18 #2H
API 3514921640 · Washita County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| DES MOINES GRANITE WASH | GAS | 12,675–16,743 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2012-09-11 | 227 | 4,116 | 280 | 53 | 1,650 | 24 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9 5/8 | 40 | HCL-80, J-55 | 5,600 | 1,120 |
| INTERMEDIATE | 7 | 26 | ECP-110 | 12,904 | 720 |
| PRODUCTION | 4 1/2 | 13.5 | P-110 | 16,810 | 540 |
| SURFACE | 13 3/8 | 48 | J-55 | 855 | 1,270 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2012-02-17
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| DES MOINES GRANITE WASH | 11,800 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.436809, -99.092794
Every well in Washita County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.