LEXINGTON #1-23H

API 3515123413 · Woods County, Oklahoma

ACGAS
API
3515123413
Operator
BCE-MACH LLC
County
Woods

Completions

Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.

Completion 0

HORIZONTAL HOLEACGAS
Spudded
2010-06-05
Drilling finished
2010-07-02
Completed
2010-07-30
First production
2010-08-11
Total depth
9,600 ft
Operator
BCE-MACH LLC

Interval

FormationProducedPerforated (ft)Treatment
MISSISSIPPIOIL5,243–9,496Acid, Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-08-141686522,612—064/64

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/217N-809,6001,670
SURFACE9 5/836J-55802455

Completion 1

HORIZONTAL HOLEACGAS
Spudded
2010-06-05
Drilling finished
2010-07-02
Completed
2010-07-30
First production
2010-08-11
Total depth
9,600 ft
Operator
BCE-MACH LLC

Interval

FormationProducedPerforated (ft)
MISSISSIPPIGAS5,243–9,496

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2017-03-193199172—0—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/217N-809,6001,670
SURFACE9 5/836J-55802380

Drilling permit

Oklahoma files 1 application to drill this well, naming 4 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2010-05-05

WRADRHorizontal hole
Permit API
35151234130000
Operator
CHESAPEAKE OPERATING LLC
Well type
GAS
Approved
2010-05-05
Expires
2010-11-05
Proposed depth
9,800 ft
Proposed measured depth
9,600 ft
Proposed true vertical depth
5,076 ft
Proposed lateral
4,345 ft
Surface casing
800 ft
Ground elevation
1,290 ft

Target formations

FormationExpected top (ft)
TONKAWA4,275
KANSAS CITY4,565
OSWEGO4,860
MISSISSIPPI5,105

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

36.885056, -98.574140

36.88506, -98.57414 · Surface location as filed with Oklahoma

Every well in Woods County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.