MineralRecord
Log inSign up

WR 16G-32-10-17

API 43013503700000 · Duchesne County, Utah · EIGHT MILE FLAT field

PAOWPlugged 2020-01-04
API
43013503700000
Operator
KODA Uinta, LLC
County
Duchesne
Field
EIGHT MILE FLAT
Location
SESE Sec 32 10S 17E (S)
Plugged
2020-01-04
Measured depth
8,115 ft
True vertical depth
4,716 ft

Wellbore

Utah holds the directional plan this operator filed before drilling, not a survey of the hole as drilled.

Deepest station
8,421 ft
True vertical depth
4,731 ft
Reach from well head (derived)
3,923 ft
Bearing (derived)
288°
Stations shown
214

This is the path the operator proposed. The hole may not have been drilled along it, and Utah has filed no survey of the hole as drilled for this well. Utah filed 368 stations for this well. The 214 shown are the ones that carry the shape: every station left out lies within 25 ft of the line drawn through the ones kept. The reach and bearing are derived from two points Utah filed. Neither is a figure the operator reported.

Work history

Utah files 3 records of work done on this well — each drill, plug, deepening, re-entry, re-perforation and recompletion, with the depths reached. 2 carry a production test the operator filed afterwards.

DRILL

HORIZONTALPOW
Spudded
2010-08-29
Completed
2011-01-20
First production
2010-12-10
Measured depth
7,635 ft
True vertical depth
4,823 ft

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-12-13253058———

A production test is one measurement the operator made on one day and filed with Utah. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Utah records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Utah did not file, or one it filed outside any physically possible range.

DRILL

HORIZONTALPOW
Spudded
2010-08-29
Completed
2011-01-20
First production
2010-12-10
Measured depth
8,844 ft
True vertical depth
4,732 ft

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-12-13253058———

A production test is one measurement the operator made on one day and filed with Utah. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Utah records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Utah did not file, or one it filed outside any physically possible range.

PLUG

PAOW

Location

39.894920, -110.025361

39.89492, -110.02536 · Surface location as filed with Utah

Every well in Duchesne County, Utah

Utah state record, from UT_wells_Wells.parquet. Corpus built 2026-09-11.